PLASTIC MASTERBATCHES
SPECIAL EFFECT & COMMERCIAL MASTERBATCHES
(KODE: SE & CO)
| No | Product Name/Type | Heat Resistance °C | APPLICATION | ||
|---|---|---|---|---|---|
| Food Contact | Heavy Metal Free | Outdoor | |||
| 1 | MB SE BLUE 01-4 | 280 | □ | √ | √ |
| 2 | MB SE GOLD 41 | 220 | □ | □ | □ |
| 3 | MB SE GREEN 71-3 | 230 | □ | √ | √ |
| 4 | MB SE PEARL 03 | 230 | □ | √ | □ |
| 5 | MB SE RED 51-3 | 220 | □ | √ | □ |
| 6 | MB SE SILVER 02 | 280 | □ | √ | □ |
| 7 | MB CO BLACK 88 | 300 | √ | √ | √ |
| 8 | MB CO WHITE 81 | 260 | √ | √ | □ |
| 9 | MB CO WHITE 75 | 260 | √ | √ | □ |
| 10 | MB CO WHITE 12075 | 260 | √ | √ | □ |
| 11 | MB CO BLACK 3510 | 230 | √ | √ | □ |
| 12 | MB CO RED 868 | 220 | □ | √ | □ |
| 13 | MB CO GREEN 816 | 200 | □ | √ | □ |
| 14 | MB CO YELLOW 7111 | 200 | □ | □ | □ |
| 15 | MB RED OP 121 | 220 | □ | √ | □ |
| 16 | MB YELLOW OP 791 LF | 200 | □ | √ | □ |
| 17 | MB YELLOW OP 742 | 240 | □ | □ | √ |
| 18 | MB YELLOW OP 743 | 200 | □ | □ | □ |
The above data sheet is to the best of our knowledgement. Our masterbatches colouring plastic offered in good faith, but without guarante, as conditions and methode of utilitazation of our product are beyond our control. We recommend that the prospective user determine tha suitability of our materials before adopting them on a commercial scale.
NOTE:
√ = Recommended
□ = Not Recommended
Form: Granules or pellet
Packaging: 25 Kilograms Zak/Paper Bag
Dosage use: 1-2 phr (per hundred resin)
Benefits
Knowledge of our plastic masterbatches is Food Contact Approval, Heavy Metal Free, Outdoor application or not and Heat Resistance specification
Food Contact Approval
Product recommended because the materials used in the product conform to food regulation.
Heavy Metal Free
Product recommended because the materials used in the product conform to EN 71-3:1994 regulation. This masterbatches produces a range of Heavy Metal FREE masterbatches to meet the most stringent international regulatory standards. This masterbatches suitable for colouring thermoplastic, polyolefins, engineering polymers and engineering resins plastic.
Heat Resistance
Heat resistance indicates the maximum temperature (in °C) at which a change of color occurs no greater than rating 4 on ISO 105 AO2 1-5 gray scale, up to dwell time of 5 minutes in the barrel of an injection moulding or extrusion.
Outdoor Application
Product recommended for use in outdoor plastic products